0%
The Jumping Bean is a result of rider feed back altering the very popular “Runt” design. Riders wanted a hybrid fish/perfromance board with less width and a narrower tail to facilitate a tighter turning radius. They wanted a little bit less rocker and lighter concaves so it wouldn’t feel so squirrelly in larger more powerful conditions. The end result of this collaboration is the Jumping Bean, an extremely versatile performance/groveler design for travel or shredding slop around town.
LENGTH | WIDTH | THICKNESS | VOLUME |
| 5'5" | 18.5 | 2.187 | 22.2 |
| 5'6" | 18.625 | 2.25 | 22.7 |
| 5'7" | 18.75 | 2.25 | 23.6 |
| 5'8" | 19 | 2.25 | 24.4 |
| 5'9" | 19.25 | 2.312 | 25.6 |
| 5'10" | 19.375 | 2.375 | 26.3 |
| 5'11" | 19.5 | 2.375 | 28.6 |
| 6'0" | 19.75 | 2.5 | 29.7 |
| 6'1" | 20 | 2.5 | 32.1 |
| 6'2" | 20.25 | 2.625 | 33 |
| *Don't be shy! Custom sizes available | |||
The Rounded Squash is a softer version of a squash tail. A nice combination of a rounded pin and a squash tail. Allows for easy turn initiation with plenty of hold. This designs also reduces the tail width to help decrease the turning radius. This tail is fast, maneuverable and extremely versatile. Works well in a variety of conditions.
*Don’t be shy! ask about tail options
Medium profile rail provides hold. The slight increase in volume gives the board a more forgiving feel and lessens the chance of you catching your edge or digging your rail.
Standard with 5 fin configuration. Gives you the option of a quad or 3 fin set up. Your choice of FCS or Future plugs.
This Board was design to perform in knee high to overhead waves. All conditions from mushy chop to A-frame barrels
Polyurethane foam – more responsive in its performance and flex pattern. Creates a consistent traditional feel. The least expensive option, less durable.
Extruded polystyrene foam – lighter weight results in ability to glass boards heavier making them more durable. More expensive process and is less responsive in flex pattern and creates a more sensitive feel.
PU Glassing:
4×4 oz deck (full patch), 4 oz bottom – light weight and weak
4×6 oz deck (3/4 patch), 4 oz bottom – light weight and strong
4×6 oz deck (full patch), 4 oz bottom – light weight and very strong
EPS Glassing:
4×6 oz deck (full patch), 4 oz bottom – light weight and strong
6×6 oz deck (full patch), 6 oz bottom – light weight and extremely strong
Carbon fiber – will stiffen flex and create positive flex recoil. Helps prevent breakage and pressure dents from your feet.
ROCKER
Moderate exit rocker is a comfortable balance between drive and release. Suits the largest range of conditions and surfers.
Low mid rocker results in a board that carries speed, and has a stable consistent over all feel. Works well in weaker less powerful surf.
Moderate entry rocker is fast and responsive feel. Works well in a large variety of conditions and wave types.
CONCAVES
Medium Double concave directs water through the the tail of the board. This concave provides speed, lift and maneuverability. Performs in the broadest variety of conditions.
Medium Single concave directs water under the hull. Provides speed, lift and maneuverability. Performs in the broadest variety of conditions.
Flat is generally used as the starting or ending point for all concaves. Flat is stable and fast without having much effect on performance but also has no draw backs.
