0%
A board that you can steal away the smallest waves possible. A board that feeds and thrives off the bottom end of the wave spectrum. This design has it’s roots based on the Chubby model, which was a favorite groveler we sold for years. It has an update bottom contour and bump in the tail to facilitate a better turning radius. The single concave is deep to keep this board fast and loose. We add a bit of vee out through the tail to help you get this board on a rail. I incorporated a fuller rail to help keep it from digging in burger style waves, but thin enough to give it some sensitivity. I’ve changed the standard tail from a thumb to a squash to help with release and hold. It can be ridden as a quad or thruster depending on conditions and your style.
This is a great design for burgers or small waves with some juice.
LENGTH | WIDTH | THICKNESS | VOLUME |
| 5'2" | 20 | 2.25 | 27.3 |
| 5'4" | 20.5 | 2.25 | 29.1 |
| 5'6" | 20.75 | 2.375 | 31.8 |
| 5'8" | 21 | 2.375 | 33.8 |
| 5'10" | 21.5 | 2.5 | 36.9 |
| 5'11" | 21.75 | 2.5 | 38.4 |
| 6'0" | 22 | 2.625 | 41.1 |
| 6'2" | 22.5 | 2.75 | 44.9 |
| *Don't be shy! Custom sizes available | |||
The Rounded Squash is a softer version of a squash tail. A nice combination of a rounded pin and a squash tail. Allows for easy turn initiation with plenty of hold. This designs also reduces the tail width to help decrease the turning radius. This tail is fast, maneuverable and extremely versatile. Works well in a variety of conditions.
*Don’t be shy! ask about tail options
Medium profile rail provides hold. The slight increase in volume gives the board a more forgiving feel and lessens the chance of you catching your edge or digging your rail.
Standard with 5 fin configuration. Gives you the option of a quad or 3 fin set up. Your choice of FCS or Future plugs.
This Board was design to perform in knee high to head high waves. All conditions from mushy chop to A-frame barrels.
Polyurethane foam – more responsive in its performance and flex pattern. Creates a consistent traditional feel. The least expensive option, less durable.
Extruded polystyrene foam – lighter weight results in ability to glass boards heavier making them more durable. More expensive process and is less responsive in flex pattern and creates a more sensitive feel.
PU Glassing:
4×4 oz deck (full patch), 4 oz bottom – light weight and weak
4×6 oz deck (3/4 patch), 4 oz bottom – light weight and strong
4×6 oz deck (full patch), 4 oz bottom – light weight and very strong
EPS Glassing:
4×6 oz deck (full patch), 4 oz bottom – light weight and strong
6×6 oz deck (full patch), 6 oz bottom – light weight and extremely strong
Carbon fiber – will stiffen flex and create positive flex recoil. Helps prevent breakage and pressure dents from your feet.
ROCKER
Moderate exit rocker is a comfortable balance between drive and release. Suits largest range of conditions and surfers.
Low mid rocker results that carries speed, and stable consistent over all feel. Works well in weaker, less powerful surf.
Low entry rocker creates a board that will provide speed and drive with minimal effort. Works best in knee to chest-high, less powerful surf.
CONCAVES
Vee creates remarkable rail to rail performance. Helps compensate maneuverability for boards with a wider outline.
Medium Single directs water under the hull. Provides speed, lift, and maneuverability. Performs in the broadest spectrum of conditions.
Flat is generally used as the starting or ending point for all concaves. It provides a stable feel and speed without have much effect on performance, but also no draw backs.
