0%
This is probably the most versatile user friendly small wave board. Just about everybody loves this design for any kind of rippable waves. Goes fast, carves hard, and paddles with ease. Rocker is pretty flat over all and is designed for speed and stability. It has a kick in both nose and tail to keep her loose and fit in the pocket. This board is super forgiving so it can fit most ability levels and surfing styles. Triple concave bottom single/double/vee is a combination designed for both small and larger waves.
LENGTH | WIDTH | THICKNESS | VOLUME |
| 5'5" | 19 | 2.187 | 22.2 |
| 5'6" | 19.125 | 2.187 | 22.7 |
| 5'7" | 19.25 | 2.25 | 23.6 |
| 5'8" | 19.5 | 2.25 | 24.4 |
| 5'9" | 19.625 | 2.25 | 25.6 |
| 5'10" | 19.75 | 2.375 | 26.3 |
| 5'11" | 20 | 2.375 | 28.6 |
| 6'0" | 20.25 | 2.5 | 29.7 |
| 6'1" | 20.375 | 2.5 | 32.1 |
| 6'2" | 20.5 | 2.625 | 33 |
| *Don't be shy! Custom sizes available | |||
Swallow tail creates drive out of turns due to the fairly straight rail line. Similar in feel to a squash or rounded squash. The vee cut allows for a little resistance when initiating your turns but still maintains hold and control. Very popular in small wave and large wave guns.
Medium profile rail provides hold. The slight increase in volume gives the board a more forgiving feel and lessens the chance of you catching your edge or digging your rail.
Standard with 5 fin configuration. Gives you the option of a quad or 3 fin set up. Your choice of FCS or Future plugs.
This Board was design to perform in knee high to overhead waves. All conditions from mushy chop to A-frame barrels
Polyurethane foam – more responsive in its performance and flex pattern. Creates a consistent traditional feel. The least expensive option, less durable.
Extruded polystyrene foam – lighter weight results in ability to glass boards heavier making them more durable. More expensive process and is less responsive in flex pattern and creates a more sensitive feel.
PU Glassing:
4×4 oz deck (full patch), 4 oz bottom – light weight and weak
4×6 oz deck (3/4 patch), 4 oz bottom – light weight and strong
4×6 oz deck (full patch), 4 oz bottom – light weight and very strong
EPS Glassing:
4×6 oz deck (full patch), 4 oz bottom – light weight and strong
6×6 oz deck (full patch), 6 oz bottom – light weight and extremely strong
Carbon fiber – will stiffen flex and create positive flex recoil. Helps prevent breakage and pressure dents from your feet.
ROCKER
Moderate exit rocker is a comfortable balance between drive and release. Suits the largest range of conditions and surfers.
Low mid rocker results in a board that carries speed, and has a stable consistent over all feel. Works well in weaker less powerful surf.
Low entry rocker creates a board that will provide speed and drive with minimal effort. Works best in knee to chest-high, less powerful surf.
CONCAVES
Vee creates remarkable rail to rail performance. Helps compensate maneuverability for boards with a wider outline.
Medium Double concave directs water through the the tail of the board. This concave provides speed, lift and maneuverability. Performs in the broadest variety of conditions
Deep Single concave directs water under the hull. Provides speed, lift and maneuverability. Performs better in weak, less powerful surf.
Flat is generally used as the starting or ending point for all concaves. Flat is stable and fast without having much effect on performance but also has no draw backs.
